偷窥国产综合_天天干天天色综合_蜜桃视频成人A片免费观看少妃_16p亚洲 - 亚洲国产综合在线观看不卡

AS/NZS 4859.1:2018 - Thermal Insulation material testing

玻璃棉巖棉等保溫材料出口澳大利亞需滿足AS/NZS 4859.1的標準要求，產品經過測試合格并經過嚴格的工廠評估后可頒發認證證書STANDARDMARK認證，南京睿督公司已澳洲NATA資質實驗室合作十年多年，專業提供NATA資質的AS/NZS 4859.1(AS 4859.1),AS1530.3，AS3837等澳標防火檢測，咨詢電話：025-8658 3475。

AS/NZS 4859.1:2018 - Thermal Insulation material testing

Testing in accordance with AS/NZS 4859.1:2018 Thermal Insulation Materials for Buildings - General Criteria and Technical Provisions.

ASNZS 4859.1 was significantly amended in 2018. The emphasis on the amendment was to include a wider range of insulating materials bringing rigid foam products into the standard. These new inclusions now incorporate the following:
EPS – expanded polystyrene foams
XPS – extruded polystyrene foams
PUR – polyurethane foams
PIR – polyisocyanurate foams
PF – phenolic foams

With the exception of EPS, these foams are expanded with a blowing agent. Due to the presence of the blowing agents, the cell gas composition changes with time and exposure to heat. These changes draw interest to the effect on insular performance. Therefore, the new standard gives us procedures for accelerated ageing to predict the effect of ageing over a 25 year period. The accelerated ageing procedures differ somewhat depending upon the type and thickness of foams as listed above and testing now aims to achieve declared values for thermal resistance and thermal conductivity corresponding to an expected service life. As thermal performance is a primary performance requirement, attention has been given to the determination and labelling of thermal performance. AWTA Product Testing has drawn from the standard and it’s relevant conditioning and ageing procedures and tabled fact sheets to assist our clients to determine the ageing and testing that needs to be done in order to measure declared thermal performance. Our customer support team is ready to assist you to determine ageing and testing requirements in order to correctly label rigid foams for the market place.

AS/NZS 4859.1玻璃棉巖棉等保溫材料澳大利亞認證  http://www.firete.com/popular_standards/14076.html 

玻璃棉巖棉等保溫材料出口澳大利亞需滿足AS/NZS 4859.1的標準要求，產品經過測試合格并經過嚴格的工廠評估后可頒發認證證書STANDARDMARK認證，南京睿督公司已澳洲NATA資質實驗室合作十年多年，專業提供NATA資質的AS/NZS 4859.1(AS 4859.1),AS1530.3，AS3837等澳標防火檢測，咨詢電話：025-8658 3475。

AS/NZS 4859.1:2002保溫材料澳大利亞認證

AS/NZS 4859.1:2002-Materials for the thermal insulation of buildings - General criteria and technical provisions
AS/NZS 4859.1:2002-建筑物隔熱材料，一般標準和技術條款（玻璃棉、巖棉等保溫材料）

AS/NZS 4859.1主要關注如下方面的測試項目

熱阻、對火的反應、重量、密度、尺寸等方面測試
thermal resistance, density, dimension, reaction to fire

AS/NZS 4859.1玻璃棉巖棉認證標準適用范圍Scope

This Standard specifies requirements and methods of test for materials that are added to, or incorporated in, opaque envelopes of buildings and building services, including ductwork and pipework, to provide thermal insulation by moderating the flow of heat through these envelopes and building services.

This Standard does not cover materials for the insulation of windows or other glazing. Although this Standard covers thermal performance of insulation, there may be requirements in the Building Code of Australia, or elsewhere, for the same material to have other properties such as for acoustic isolation or fire properties. Further, in a regulatory situation, a requirement for thermal performance cannot compromise any other required performance.

Specific requirements for individual materials or insulation types are given in Sections 5 to 9 of this Standard and in the following Standards:

(a) Rigid cellular polyurethane (RC/PUR) - AS 1366.1;
(b) Rigid cellular polyisocyanurate (RC/PIR) - AS 1366.2;
(c) Rigid cellular polystyrene Moulded (RC/PS-M) - AS 1366.3;
(d) Rigid cellular polystyrene Extruded (RC/PS-E) - AS 1366.4; and
(e) Urea-formaldehyde foam thermal insulationIn situ set foam - AS 4073.

The scope of this Standard does not cover requirements for fire performance
AS3837測試 http://www.fire-test.com/teststandard/other/3434.html 
澳洲NATA資質 http://www.fire-test.com/laboratory/6603.html  

更多關于澳洲NATA資質AS/NZS 4859.1玻璃棉巖棉等保溫材料澳大利亞認證，請咨詢南京睿督公司
南京睿督公司咨詢電話：400-603-6575   025-8658 3475
網址：www.fire-test.com   www.fire-test.cn
郵箱：info@fire-test.com 

...