電話:025-8658 3475
傳真:025-8658 3457
網址:http://www.cnbtos.com/
郵箱:info@fire-test.com
AS ISO 9705全尺寸房間燃燒試驗,澳標AS5637.1引用AS ISO9705或者AS3837等標準來進行防火等級Group 1、Group 2、Group 3、Group 4測試及評估。AS5637.1標準何種條件下引用AS ISO9705標準來進行防火等級測試,請咨詢南京睿督公司,咨詢電話:025-8658 3475。
AS ISO 9705全尺寸房間熱釋放率試驗,AS ISO 9705火災標準試驗間是國際通用的大尺寸火災試驗房間,運用該房間進行熱釋放率的測量試驗具有典型室內火災的特征。基于耗氧原理的熱釋放率測量原理,塑料以及其他有機固體可燃物在完全燃燒時,每消耗單位質量的氧所釋放的凈熱量接近一常數;其值為E=13.1MJ/kg。根據這一規律,只要精確測量到燃燒系統中所耗用的氧,就能計算得到燃燒的熱釋放率。
AS5637.1-2015防火等級評定
AS5637.1-2015 Determination of fire hazard properties-wall and ceiling linings(Australian Standard)
AS5637.1-2015 測定火災危險特性-墻體及天花板(澳大利亞標準)。AS5637.1的防火等級性能,AS5637.1將防火性能劃分四個等級,分別為Group 1; Group 2; Group 3; Group 4。
AS5637.1 Group 1-material that does not reach flashover when exposed to 100KW for 600s followed by exposure to 300KW for 600s.
AS5637.1 Group 2- material that flashover flashover following exposure to 300KW within 600s after not reaching flashover when exposed to 100KW for 600s.
AS5637.1 Group 3- material that reaches flashover in more than 120s but within 600s when exposed to 100KW.
AS5637.1 Group 4- material that reaches flashover within 120s when exposed to 100KW.
AS3837測試 http://www.fire-test.com/teststandard/other/3434.html
澳洲NATA資質 http://www.fire-test.com/laboratory/6603.html
更多關于AS5637.1-2015澳標測定火災危險特性,請咨詢南京睿督公司
南京睿督公司咨詢電話:400-603-6575 025-8658 3475
網址:www.fire-test.com
郵箱:info@fire-test.com
...