電話：025-8658 3475
傳真：025-8658 3457
網址：http://www.cnbtos.com/
郵箱：info@fire-test.com
ASTM E 595 outgassing test除氣測試最新版本為ASTM E 595-15，已取代ASTM E 595-07版本。ASTM E595除氣測試，使用篩選技術來確定的材料在真空狀態下的揮發物含量。主要測試兩個參數：總質量虧損（TML）和揮發物質冷凝量（CVCM）。另一個參數水汽量(WVR), 也可以在完成對TML和CVCM的測試后獲得。南京睿督公司協助國內外企業申請美標ASTM E595除氣測試，咨詢電話：025-8658 3475。
ASTM E595除氣測試標準
ASTM E595 在真空環境中除氣作用引起的總質量損失和揮發物質冷凝量的測試方法，關于ASTM E595-15與ASTM E595-07標準的具體區別可以咨詢南京睿督公司。
ASTM E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E595除氣測試-測試方法
ASTM E595 outgassing test, This test method covers a screening technique to determine volatile content of materials when exposed to a vacuum environment. Two parameters are measured: total mass loss (TML) and collected volatile condensable materials (CVCM). An additional parameter, the amount of water vapor regained (WVR), can also be obtained after completion of exposures and measurements required for TML and CVCM
ASTM E595除氣測試-測試范圍
各種各樣的有機分子，聚合物和無機材料都可以被測試。這些材料包含：聚合混合物，發泡材料，彈性體，薄膜，膠帶，絕緣體，收縮管，膠水，涂料，紡織面料，和輪滑油，這些材料可以在原始接受的狀態下測試，也可以通過多種方式固化后測試。
Many types of organic, polymeric, and inorganic materials can be tested by ASTM E595 outgassing test. These include polymer potting compounds, foams, elastomers, films, tapes, insulations, shrink tubings, adhesives, coatings, fabrics, tie cords, and lubricants. The materials may be tested in the “as-received” condition or prepared for test by various curing specifications.
ASTM E595除氣測試-測試項目和要求：
TML （total mass loss）總質量虧損,要求≤1%
CVCM （collected volatile condensable materials）揮發物質冷凝量, 要求≤0.1%
WVR （the amount of water vapor regained）水汽量
ASTM E595 除氣測試 outgassing test http://www.fire-test.com/teststandard/other/4083.html
南京睿督與美國權威實驗室合作，提供專業權威的ASTM E 595-2015檢測報告。
南京睿督公司免費咨詢電話：025-8658 3475 400-603-6575
網址：www.fire-test.com
郵箱：info@fire-test.com
…
蘇公網安備 32010502010098號