電話：025-8658 3475
傳真：025-8658 3457
網址：http://www.cnbtos.com/
郵箱：info@fire-test.com
Reaction-to-fire testing analyzes how a material or product responds to a controlled fire challenge. Measurements can include how fast the material ignites, how much and how quickly heat is emitted, how much mass is lost, and how much smoke is produced.
The rate of heat release is considered to be a significant predictor of a potential fire hazard, and the cone calorimeter is a valuable bench-scale instrument in fire testing to quantitatively evaluate the relative risk that different materials pose.
Due to the relatively small specimen sizes used for the test, the cone calorimeter test is a cost-effective way to research the fire performance of products while still in the developmental stage, for assessing material compliance to established performance requirements, as on-going quality control, or even to generate data for litigation purposes.
Additional advantages to cone calorimeter testing are the ability to measure smoke production, which can play an important role in material selection for critical applications.
ISO5660-1燃燒熱釋放速率測試
ISO 5660-1 Reaction to fire tests-Heat release, smoke production and mass loss rate-Part 1: Heat release rate (cone calorimeter method)
ISO 5660-1對火反應試驗—熱釋放、產煙量及質量損失率,第1部分:熱釋放速率(錐形量熱儀法)
ISO 5660-1標準概述
錐形量熱試驗是目前評估材料對火反應最先進的方法。測試按照物質燃燒的耗氧原理即被測物質與氧完全燃燒時消耗單位質量氧所產生的熱量。
該方法是按照國際標準ISO 5660-1進行測定的。
另外，在測試過程中可以對產煙量和煙霧毒性進行測量。
該測試主要評估以下測試項目：
1 可燃性；
2 火焰?zhèn)鞑ィ?br/>3 產煙量；
4 煙霧毒性；
更多關于ISO5660-1燃燒熱釋放速率測試/EN45545-2測試詳細內容，請參考南京睿督公司
南京睿督公司免費咨詢電話：400-603-6575 025-8658 3475
網址：www.fire-test.com
郵箱：info@fire-test.com
…
蘇公網安備 32010502010098號