電話:025-8658 3475
傳真:025-8658 3457
網址:http://www.cnbtos.com/
郵箱:info@fire-test.com
EXOVA MATERIALS TECHNOLOGY AB實驗室已更名為ELEMENT MATERIALS TECHNOLOGY AB實驗室,ISO9080認證是塑料管和管道系統用外推法測定熱塑管材的長期靜液壓強度的認證。南京南京睿督公司提供UKAS資質的Warrintonfire實驗室機構,瑞典ELEMENT MATERIALS TECHNOLOGY AB實驗室機構所出具的ISO9080等級檢測報告及證書,以確保您的ISO9080測試報告在全世界通用,咨詢電話:025-8658 3475。
瑞典ELEMENT MATERIALS TECHNOLOGY AB及EXOVA實驗室介紹
Exova Material Technologies changed name to Element Material Technologies and we want to take the opportunity to remind you of that name change. The company still offers the same accredited testing and all other services you are used to. In addition to those you now also have easy access to all other 200+ global testing facilities in the Element group.
On 29 June, 2017, Exova was acquired by Element Materials Technology. Since that date, the two companies have been working together to integrate our businesses into a single organization that is now known as Element.
ISO 9080標準名稱
ISO 9080-2012 Plastics piping and ducting systems-Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
ISO 9080-2012 塑料管和管道系統--外推法測定熱塑管材的長期靜液壓強度
ISO 9080長期靜液壓強度測試參考標準
ISO 11357-3 塑料--差示掃描量熱法(DSC)--第3部分:熔融和結晶溫度及熱焓的測定
ISO 1167-1 輸送流體用熱塑管、管接及配件--耐內壓性測定-第1部分:一般方法
ISO 1167-2 輸送流體用熱塑管、管接及配件--耐內壓性測定--第2部分:管件試樣的制備
ISO 12162 壓力應用管配件用熱塑性材料--分級、命名和設計系數
ISO 17456 塑料管路系統--多層管道--長期強度的測定
ISO 2507-1 熱塑管及配件--維卡軟化溫度--第一部分:一般試驗方法.
ISO 3126 塑料管道系統--尺寸測量
瑞典ELEMENT MATERIALS TECHNOLOGY AB其它測試標準
ISO 13479 Determination of resistance to slow crack growth (SCG) of notched pipes
ISO 13477 Determination of resistance to rapid crack propagation (RCP), S4 test (Small-scale steady-state test)
ISO 1167 Determination of resistance to internal pressure for thermoplastic pipes, fittings and assemblies for conveyance of fluids.
ISO 22391 Standard specification for plastics piping systems for hot and cold water installations-Polyethylene of raised temperature resistance (PE-RT)
ISO 4427 Standard specification for polyethylene (PE) pipes and fittings for water supply
ISO 9080-2012 Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
PPI TR3 HDB/HDS/PDB/SDB/MRS/CRS policies and listed material
ASTM F2389 Standard specification for pressure-rated polypropylene (PP) piping systems.
ASTM D3350 Standard specification for polyethylene (PE) pipes and fitting materials
ASTM D2837 Standard test to obtain Hydrostatic Design Basis (HDB) for thermoplastic pipe materials and pressure Design Basis (PDB) for pipe products
ASTM D2992 Hydrostatic or Pressure Design Basis for “Fiberglass” pipe and Fittings
ASTM F2023 & ASTM F 2263 Evaluation of oxidative resistance to hot chlorinated water for PEX, PP, PE tubing and systems.
瑞典Bodycote Polymer AB實驗室ISO9080 http://www.fire-test.com/laboratory/8077.html
更多關于瑞典ELEMENT MATERIALS TECHNOLOGY AB實驗室及ISO9080管材靜液壓強度測試,請咨詢南京睿督公司
南京睿督公司咨詢電話:400-603-6575 025-8658 3475
網址:www.fire-test.com
郵箱:info@fire-test.com
...