電話：025-8658 3475
傳真：025-8658 3457
網址：http://www.cnbtos.com/
郵箱：info@fire-test.com
南京睿督公司專業從事軌道車輛防火煙毒測試十多年，在防火測試認證方面擁有豐富經驗，南京睿督公司專業提供美標49 CFR Part 238，49 CFR 238.103防火煙毒測試及美標NFPA130測試，具體內容請咨詢睿督公司025-8658 3475。
49 CFR Part 238- Transportation-Passenger Equipment Safety standards
Subpart B - Safety Planning and General Requirements
Section 238.103 - Fire safety.
Subtitle B - Other Regulations Relating to Transportation (Continued)
Chapter II-Federal Railroad Administration, Department of Transportation
The following excerpt is a generic set of flammability criteria intended for passenger transit rail vehicle specifications. The requirements are based on a combined set of criteria from NFPA 130-2017, the current 49 CFR 238.103, and Appendix B to Part 238, and industry informal standards such as Boeing BSS 7239, and Bombardier Transportation SMP 800-C.
All materials used in the vehicle shall comply with the flammability; smoke emission, toxic gas, and fire retardation requirements specified herein.
Materials used in the construction of the vehicle shall meet the requirements contained in this section, 49 CFR 238.103, Appendix B to Part 238, and NFPA 130-2014.
Should a conflict exist between the NFPA and Federal requirements and requirements listed elsewhere in these provisions, the more restrictive shall govern. Note: the FRP smoke requirement has been modified to a more restrictive value to improve smoke characteristics for tunnel operation.
Materials used in the construction of the vehicle shall be selected to minimize the total combustible material content of the vehicle.
The Contractor shall furnish a comprehensive listing of materials used in the vehicles in matrix form (flammability matrix). The flammability matrix shall include the following information as a minimum:
Material application (component description, part/drawing number, and location)
Material supplier (full name of material manufacturer)
Material description (actual material name and trade name)
Material part number, formula number, or compound number
Material weight (both density and total weight in vehicle)
Flammability data as applicable:
Flame spread / flammability
Smoke generation
Heat value per pound
Heat release rate
Total heat released
Flashpoint / autoignition temperature
Toxic content in combustion products
Testing laboratory (full name of independent testing entity)
Submittal letter (letter number(s) submitting test reports and material specifications)
Response Letter (letter(s) dispositioning the latest submission of data)
Approval status (current approval status of the specific material)
The Contractor shall submit laboratory test results for all materials, for all tests specified, including a technical data sheet, for approval. The flammability matrix shall contain sufficient information to positively identify each material listed [CDRL Requirement].
The material description used by the contractor shall be identical in every place it appears; test report documentation, technical data sheet, drawings, bill of materials, flammability matrix, and other related references. This documentation must be directly traceable between the technical documentation, test reports and flammability matrix, to the applicable Contractor drawings without ambiguity.
Copies of prior test results showing that proposed materials have complied with the specified standards and tests may be submitted for approval if the test reports are no more than three years old. Assurance may be required that the material presently being considered for use is the same composition as that previously tested.
我們同時還提供美標的各種防火測試
NFPA130美國防火測試 http://www.fire-test.com/teststandard/usa/3239.html
ASTM E162表面燃燒性能測試 http://www.fire-test.com/teststandard/usa/3346.html
ASTM E662煙密度測試 http://www.fire-test.com/teststandard/usa/3347.html
ASTM E648地板臨界熱量測試 http://www.fire-test.com/teststandard/usa/3348.html
ASTM C1166彈性材料測試 http://www.fire-test.com/teststandard/usa/3341.html
ASTM D3675表面燃燒測試方法 http://www.fire-test.com/teststandard/usa/3427.html
ASTM E84表面燃燒性能測試 http://www.fire-test.com/teststandard/usa/3343.html
BSS 7239毒性測試 http://www.fire-test.com/teststandard/usa/3351.html
Bombardier SMP 800-C毒性測試 http://www.fire-test.com/teststandard/usa/3349.html
美標49 CFR 238.103 http://www.firete.com/news/zhengce/13485.html
49 CFR Part 238 – Passenger Equipment Safety Standards
Subpart A - General (§§ 238.1 - 238.23)
Subpart B - Safety Planning and General Requirements (§§ 238.101 - 238.137)
Subpart C - Specific Requirements for Tier I Passenger Equipment (§§ 238.201 - 238.237)
Subpart D - Inspection, Testing, and Maintenance Requirements for Tier I Passenger Equipment (§§ 238.301 - 238.321)
Subpart E - Specific Requirements for Tier II Passenger Equipment (§§ 238.401 - 238.447)
Subpart F - Inspection, Testing, and Maintenance Requirements for Tier II Passenger Equipment (§§ 238.501 - 238.505)
Subpart G - Specific Safety Planning Requirements for Tier II Passenger Equipment (§§ 238.601 - 238.603)
Appendix A to Part 238 - Schedule of Civil Penalties 1
Appendix B to Part 238 - Test Methods and Performance Criteria for the Flammability and Smoke Emission Characteristics of Materials Used in Passenger Cars and Locomotive Cabs
Appendix C to Part 238 [Reserved]
Appendix D to Part 238 - Requirements for External Fuel Tanks on Tier I Locomotives
Appendix E to Part 238 - General Principles of Reliability-Based Maintenance Programs
Appendix F to Part 238 - Alternative Dynamic Performance Requirements for Front End Structures of Cab Cars and MU Locomotives
更多關于NFPA130 & 49 CFR 238.103防火煙毒測試詳細內容，請咨詢南京睿督公司
南京睿督公司免費咨詢電話：400-603-6575 025-8658 3475
網址：www.fire-test.com
郵箱：info@fire-test.com
…
蘇公網安備 32010502010098號