偷窥国产综合_天天干天天色综合_蜜桃视频成人A片免费观看少妃_16p亚洲 - 亚洲国产综合在线观看不卡

南京睿督公司與北美實驗室合作提供CAN/ULC-S102:2018,CAN/ULC-S102.2:2018,CAN/ULC-S102.3:2018等標準測試。更多關于CAN/ULC-S102最新版本標準內容，請咨詢南京睿督公司，咨詢電話：025-8658 3475。

加拿大CAN/ULC S102防火性能測試
用于加拿大的建筑材料及產品需要根據加拿大標準CAN/ULC-S 102進行防火性能測試。加拿大CAN/ULC-S 102此法用于測定建材表面燃燒性能。測試方法基本上類似于美國的ASTM E84法。加拿大CAN/ULC-S 102測試至少要進行3次測試，計算出火焰?zhèn)鞑ブ笖?shù)FSI1及FSI2。南京睿督公司咨詢電話：025-8658 3475。
 
將火焰前沿移動的距離對時間作圖，如所得曲線下的總面積AT≤29.7m.min，則FSI=1.85AT如AT＞29.7 m.min，則FSI1＝1640/(59.4-AT)。有些材料燃燒時，其火焰前沿在試驗早期可能傳播很快，但隨后即減慢，甚至最終不能達到試件末端，這時系按下式計算FSI2值。
FSI2＝92.5d/t。
d-火焰前沿傳播速率開始明顯下降時移動的距離，m；
t-火焰前沿移動距離d相應的時間，min。
 
根據加拿大的有關建材規范，按照CAN/ULC-S 102火焰?zhèn)鞑ブ笖?shù)及生煙性能對材料進行分類。以紅橡木的曲線包圍的面積為100，以石棉－水泥曲線包圍的面積為0，將測試樣品的曲線包圍的面積與紅橡木的相應值比較，以評估試件的熱釋放性。

CAN/ULC-S102測試方法相關內容
CAN ULC-S102表面燃燒性能測試 http://www.fire-test.com/newscenter/news/6708.html
CAN ULC-S102.2 http://www.fire-test.com/teststandard/usa/7182.html
CAN ULC-S102.3 http://www.fire-test.com/newscenter/regulation/10806.html
CAN/ULC-S127可燃性測試 http://www.fire-test.com/newscenter/regulation/11980.html

2018版加拿大防火測試標準最新標準
Standards Bulletin 2018-01 CAN/ULC-S651:2016-REV1, Standard for Emergency Valves for Flammable and Combustible Liquids

Standards Bulletin 2018-02 CAN/ULC-S639:2018, Standard for Steel Liner Assemblies for Solid-Fuel Burning Masonry Fireplaces

Standards Bulletin 2018-03 CAN/ULC-S718:2018, Standard for Site Quality Assurance Program for Spray Applied Polyurethane Foam

Standards Bulletin 2018-04 Call for Members: ULC Technical Committee S4400 on Cannabis

Standards Bulletin 2018-05 ANSI/CAN/UL/ULC 2258:2018, Standard for Aboveground Nonmetallic Tanks for Fuel Oil and Other Combustible Liquids

Standards Bulletin 2018-06 CAN/ULC-S102.3:2018, Standard Method of Fire Test of Light Diffusers and Lenses

Standards Bulletin 2018-07 CAN/ULC-S114:2018, Standard Method of Test for Determination of Non-Combustibility in Building Materials

Standards Bulletin 2018-08 CAN/ULC-S124:2018, Standard Method of Test for the Evaluation of Thermal Barriers for Foamed Plastic

Standards Bulletin 2018-09 CAN/ULC-S145:2018, Standard Method of Test for the Evaluation of Protective Coverings for Foamed Plastic Insulation – Full-Scale Room Test

Standards Bulletin 2018-10 CAN/ULC-S130:2018, Standard Method of Test for Ignition Resistance of Loose Fill Insulation (Cigarette Method)

Standards Bulletin 2018-11 CAN/ULC-S115:2018, Standard Method of Fire Tests of Firestop Systems

Standards Bulletin 2018-12 CAN/ULC-S610:2018, Standard for Factory-Built Fireplace Systems

Standards Bulletin 2018-13 CAN/ULC-S102:2018, Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies

Standards Bulletin 2018-14 CAN/ULC-S102.2:2018, Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies

Standards Bulletin 2018-18 ANSI/CAN/UL/ULC-2271:2018, Standard for Batteries for Use In Light Electric Vehicle (LEV) Applications

Standards Bulletin 2018-19 ANSI/CAN/UL/ULC 1369:2018, Standard for Aboveground Piping for Flammable and Combustible Liquids

Standards Bulletin 2018-20 CAN/ULC-S304:2016-REV1, Standard for Control Units, Accessories and Receiving Equipment for Intrusion Alarm Systems

Standards Bulletin 2018-23 ANSI/CAN/UL/ULC 1316:2018, Standard for Fibre Reinforced Underground Tanks for Flammable and Combustible Liquids

Standards Bulletin 2018-24 CAN/ULC-S139:2018-REV1, Standard for Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control, and Data Cables

更多關于CAN/ULC-S102最新版防火測試相關內容，請咨詢南京睿督公司
咨詢電話：025-8658 3475  400-603-6575
網址：www.fire-test.com
郵箱：info@fire-test.com

...