電話：025-8658 3475
傳真：025-8658 3457
網址：http://www.cnbtos.com/
郵箱：info@fire-test.com
中國防火網攜手南京睿督提供專業權威的防火阻燃煙毒檢測，主要有BS6853,DIN5510,NFF16-101,EN45545,NFPA130,鐵標TBT3237等。具體各國測試項目及內容如下：咨詢電話025-8658 3475。
BS 6853:1999 & LUL 1-085 英國防火測試標準
BS 6853:1999-載客列車設計與構造防火通用規范。BS 6853:1999 Code of practice for fire precautions in the design and construction of passenger carrying trains.
BS 6853 表1-表14（BS6853 Table 1-Table 14）
BS476-6: 火焰傳播指數測試 (Fire propagation test)
BS476-7: 火焰表面蔓延測試 (Surface flammability test)
EN ISO 4589-2: 氧指數測試 (oxygen index test)
EN ISO 4589-3: 溫升指數測試 (Temperature index test)
EN ISO 9239-1: 地板表面火焰延伸等級測試 (Spread of flame test-floor coverings)
BS 6853 Annex B.1 and B.2: 毒性測試 (Toxicity test)
BS 6853 Annex D.8.3 / D.8.4 / D.8.5 / D.8.6 / D.8.7: 煙密度測試 (Smoke density)
BS 476-4: 材料不燃性測試 (Non-combustibility test)
BS 476-15: 材料熱釋放量測試 (the rate of heat release test)
BS 476-20: 建筑材料耐火測試(一般原則) (Fire resistance-general principles )
BS 476-22: 非承重材料的耐火測試 (Fire resistance for non-load bearing)
BS4066-3: 電纜成束燃燒測試 (Flame test on bunched cables)
LUL 1-085倫敦地鐵協會防火標準（London Underground limited-Fire safety performance of materials）
LUL 2-01001-002 倫敦地鐵協會防火標準（London Underground limited-Fire safety performance of materials）
DIN 5510-2:2009-05 德國防火測試標準
DIN 5510-2:2009-05 軌道車輛的防火保護－分類、要求和測試方法。DIN 5510-2:2009-05 Preventive fire protect in railway vehicle part 2: Classification, requirement and test method.
DIN 4102-1: 防火等級測試 (Classification for building materials)
DIN 54837: 軌道車輛材料防火測試 ( Flammability testing for S2-S5)
DIN 53438-1: 軌道車輛材料防火測試 ( Flammability testing for S1)
DIN 53438-2: 軌道車輛材料防火測試 ( Flammability testing for S1)
DIN 53438-3: 軌道車輛材料防火測試 ( Flammability testing for S1)
DIN EN ISO 9239-1: 地板表面火焰延伸等級測試 (Spread of flame test-floor coverings)
DIN EN ISO 5659-2: 毒性測試( Toxicity test)
DIN EN 50266-2-4: 電纜成束燃燒測試 (Flame test on bunched cables)
DIN EN 50266-2-5: 電纜成束燃燒測試 (Flame test on bunched cables)
DIN EN 50305 Se.9.1.1電纜成束燃燒測試 (Flame test on bunched cables)
DIN EN 50305 Se.9.1.2電纜成束燃燒測試 (Flame test on bunched cables)
DIN EN 50305 Se.9.2 電纜毒性測試( Toxicity test for cable)
DIN EN 61034-1:電纜煙密度測試-第1部分：測試儀器 (smoke density of cable, Part 1-Test apparatus)
DIN EN 61034-2:電纜煙密度測試,第2部分：測試程序及要求(smoke density of cable, Part 2-Test procedure and requirement)
DIN EN 60332-1-1: 單根電纜燃燒測試(Test for Flame propagation for a single cable)
DIN EN 60332-1-2: 單根電纜燃燒測試(Test for Flame propagation for a single cable)
DIN EN 50306-1: 薄壁電纜的防火測試，一般要求(the thin wall cable for having special fire performance, Part 1: General requirements)
DIN EN 50305: 電纜防火性能測試方法 (Cable having special fire performance-test methods)
NFF16-101/NFF16-102法國防火測試標準
NFF16-101:1988 鐵路車輛防火材料的選擇。NFF16-101:1988 Railway rolling stock fire behaviour choice of material.
NFF16-102:1992 鐵路車輛防火材料的選擇-電子電器產品。NFF16-101:1988 Railway rolling stock fire behaviour choice of material-Electrical equipment.
NFP92-501: M等級測試 (Flammability test for M rating)
NFP92-503: M等級測試 (Flammability test for M rating)
NFP92-504: M等級測試 (Flammability test for M rating)
NFP92-505: M等級測試 (Flammability test for M rating)
NFP92-506: M等級測試 (Flammability test for M rating)
NFP92-507: M等級測試 (Flammability test for M rating)
NFP92-512: M等級測試 (Flammability test for M rating)
EN ISO 4589-2: 氧指數測試 (oxygen index test for I rating)
EN 60695-2-10/11: 灼熱絲測試 (Glow wire test for I rating)
NFX10-702: 煙密度測試 (Smoke test for F rating)
NFX70-100: 毒性測試 (Toxicity test for F rating)
NFC32-070: 電纜防火測試 ( Flammability test for cables)
NFG07-128: 氧指數測試 (oxygen index test for I rating)
NFT51-071: 氧指數測試 (oxygen index test for I rating)
NFC20-455: 灼熱絲測試 (Glow wire test for I rating)
UIC564-2: 國際鐵路聯盟標準(Specification of the Internation Railway Union)
NFPA130:2010美國防火測試標準
NFPA130:2010 固定軌道和旅客鐵路系統 Standard for Fixed Guideway transit and passenger rail systems.
ASTM E162: 表面燃燒測試 (Surface flammability test)
ASTM E648: 地板表面火焰延伸等級測試 (Spread of flame test-floor coverings)
ASTM E662: 煙密度測試 (smoke density test)
ASTM C1166: 火焰蔓延測試 (Flame propagation test)
ASTM D3575: 表面燃燒測試 (surface flammability of flexible cellular materials)
ASTM E84: 表面燃燒測試 (Surface burning characteristics of building materials)
ASTM D648: 塑料的撓曲溫度測試 (Deflection temperature of plastics under flexural load)
FMVSS302: 汽車內裝飾材料燃燒性能測試(Flammability of materials used in the occupant compartment of motor vehicles)
EN45545-2歐盟防火標準
EN45545-2:2013 鐵路應用-鐵路車輛的防火保護-第2部分:材料和元件的防火要求。EN45545-2:2013 Railway application-Fire protection of railway vehicles-Part 2: Requirement for fire behaviour of materials and components.
EN45545-2 R1-R26
EN13501-1 建筑防火等級劃分測試( Fire classification of construction products and building elements)
EN 50266-2-4: 電纜成束燃燒測試 (Flame test on bunched cables)
EN 50266-2-5: 電纜成束燃燒測試 (Flame test on bunched cables)
EN 50305 Se.9.1.1電纜成束燃燒測試 (Flame test on bunched cables)
EN 50305 Se.9.1.2電纜成束燃燒測試 (Flame test on bunched cables)
EN 50305 Se.9.2 電纜毒性測試( Toxicity test for cable)
EN 61034-1:電纜煙密度測試-第1部分：測試儀器 (smoke density of cable, Part 1-Test apparatus)
EN 61034-2:電纜煙密度測試,第2部分：測試程序及要求(smoke density of cable, Part 2-Test procedure and requirement)
EN 60332-1-1: 單根電纜燃燒測試(Test for Flame propagation for a single cable)
EN 60332-1-2: 單根電纜燃燒測試(Test for Flame propagation for a single cable)
EN ISO 1182: 材料不燃性測試 (Non-combustibility test)
EN ISO 1716: 熱釋放量測試 (the heat of combustion)
EN ISO 4589-2: 氧指數測試 (oxygen index test )
EN ISO 5659-2: 毒性測試( Toxicity test)
EN ISO 9239-1: 地板表面火焰延伸等級測試 (Spread of flame test-floor coverings)
EN ISO 6507-3: 硬度測試 (Vickers hardness test)
EN ISO 11925-2: 單一火焰的可燃性測試 (Ignitability of building products-single flame source test)
EN ISO 5658-2: 垂直火焰蔓延測試 (Spread of flame)
EN ISO 5660-1: 熱釋放量測試 (Heat release, smoke production and mass loss rate)
ISO 19702: 毒性測試(Toxicity testing)
NFX70-100-1: 毒性測試 (Toxicity test)
NFX70-100-2: 毒性測試 (Toxicity test)
UNI CEI 11170-3意大利防火測試標準
UNI CEI 11170-3: 軌道車輛防護的指導，第3部分：材料的防火性能評估，接受限度。UNI CEI 11170-3: Guidelines for fire protection of railway, tramway and guided path vehicles, Evaluation of fire behaviour of materials-Limits of acceptance.
prE10.02.977.03意大利防火測試標準
UNE 23.721: M等級測試 (Flammability test for M rating)
UNE 23.723: M等級測試 (Flammability test for M rating)
UNE 23.724: M等級測試 (Flammability test for M rating)
UNE 23.725: M等級測試 (Flammability test for M rating)
UNE 23.727: M等級測試 (Flammability test for M rating)
UIC564-2國際鐵路聯盟標準標準
Building test建材防火測試標準
EN13501:2007+A1:2009 建筑產品和部件燃燒性能的分類，第1部分：根據燃燒試驗反應的試驗數據進行分類。EN13501:2007+A1:2009 Fire classification of construction products and building elements-Part 1: Classification using data from reaction to fire tests.
EN ISO 1182: 不燃性測試 (Non-combustibility test)
EN ISO 1716: 熱釋放量測試 (the heat of combustion)
EN ISO 13823: 單體燃燒測試(Single burning item-SBI)
EN ISO 11925-2: 單一火焰的可燃性測試 (Ignitability of building products-single flame source test)
EN ISO 9239-1: 地板表面火焰延伸等級測試 (Spread of flame test-floor coverings)
EN 1187: 天花板測試 (Roof tests)
UK building regulations英國建材防火測試標準
BS476-4: 材料不燃性測試 (Non-combustibility test)
BS476-5: 可燃性測試 (Ignitability test)
BS476-6: 火焰傳播指數測試 (Fire propagation test)
BS476-7: 火焰表面蔓延測試 (Surface flammability test)
BS476-11: 建材熱輻射值測試 (assessing the heat emission)
BS476-12: 可燃性測試 (Ignitability test)
BS 476-15: 材料熱釋放量測試 (the rate of heat release test)
BS 476-20: 建筑材料耐火測試(一般原則) (Fire resistance-general principles )
BS 476-21: 承重材料的耐火測試 (Fire resistance for load bearing)
BS 476-22: 非承重材料的耐火測試 (Fire resistance for non-load bearing)
BS 476-23: 各部分元件對構件的耐火性分攤作用的測試 (Contribution of components to the fire resistance of a structure)
BS 476-24: 通風管道的耐火測試 (Fire resistance of ventilation ducts)
French building regulations法國建材防火測試標準
NFP92-501: M等級測試 (Flammability test for M rating)
NFP92-503: M等級測試 (Flammability test for M rating)
NFP92-504: M等級測試 (Flammability test for M rating)
NFP92-505: M等級測試 (Flammability test for M rating)
NFP92-506: M等級測試 (Flammability test for M rating)
NFP92-507: M等級測試 (Flammability test for M rating)
NFP92-512: M等級測試 (Flammability test for M rating)
EN ISO 4589-2: 氧指數測試 (oxygen index test for I rating)
EN 60695-2-10/11: 灼熱絲測試 (Glow wire test for I rating)
German building regulations德國建材防火測試標準
DIN 4102-1: 防火等級測試 (Classification for building materials)
DIN 4102-8: 小型試驗臺測試 (Small scale test furnace)
DIN 4102-14: 地板表面火焰延伸等級測試 (Spread of flame test-floor coverings)
DIN EN ISO 9239-1: 地板表面火焰延伸等級測試 (Spread of flame test-floor coverings)
EN ISO 4589-2: 氧指數測試 (oxygen index test)
The United States building regulation美國建材防火標準
ASTM E162: 表面燃燒測試 (Surface flammability test)
ASTM E648: 地板表面火焰延伸等級測試 (Spread of flame test-floor coverings)
ASTM E662: 煙密度測試 (smoke density test)
ASTM C1166: 火焰蔓延測試 (Flame propagation test)
ASTM E84: 表面燃燒測試 (Surface burning characteristics of building materials)
ASTM E119: 耐火測試 ( Fire tests of building construction and materials)
ASTM E136: 材料不燃性測試 (Non-combustibility test)
ASTM E1354: 熱釋放量測試 (Test for heat and smoke release rate)
ASTM E1530: 熱導測試 (Resistance to thermal transmission)
ASTM D2863: 氧指數測試(Oxygen index test)
ASTM D2864: 煙密度測試(Smoke density test)
UL94: 美國防火等級測試(Flammability test)
NFPA251: 建材耐火測試(Fire resistance of building construction)
NFPA252: 門及組件耐火測試 (Fire tests of door assemblies)
ISO834: 耐火測試 (Fire resistance test)
Canada building regulations加拿大防火標準
CMVSS302: 汽車內裝飾材料燃燒性能測試(Flammability of materials used in the occupant compartment of motor vehicles)
CAN/ULC S101: 建筑結構及材料的耐火性能測試方法(Fire resistance for Building construction)
CAN/ULC S102: 材料表面燃燒性能測試(Surface burning characteristics of building materials)
CAN/ULC S102.2: 地板表面燃燒特性測試(Surface burning characteristics of building materials)
CAN/ULC S104: 防火門及組件耐火測試(Standard Method for Fire tests of Door Assemblies)
CAN/ULC S127: 建筑材料易燃性測試(Standard Corner wall Method test for Flammability Characteristics)
CAN/ULC S134: 外墻附件防火測試(Standard Method of Fire Test of Exterior wall Assemblies)
CAN/ULC S135: 建筑材料燃燒分級測試方法(Determination of Degrees of Combustibility of building)
If you require any other testing, please do let us know and we will do our best to help you.
如有任何測試認證方面的疑問，請聯系我們！
南京睿督產品服務有限公司 免費咨詢電話：025-8658 3475 400-603-7565
網址：www.fire-test.com
郵箱：info@fire-test.com
……
蘇公網安備 32010502010098號